How to Replace a Kia Sportage Replacement Key
The key of a lot of Kia models has the keyless entry feature built into. The key functions like an remote control, and can be exchanged with a Kia dealer.
Key fobs may stop working due to a number of reasons, including an inactive battery, worn out buttons signals, signal interference or water damage. Here are kia picanto key fob replacement g28carkeys.co.uk to help you get your Kia sportage replacement key to work for good.
How do you replace the remote key or smartkey?
No matter if your Kia comes with an intelligent key, remote key, push-to-start key, or a regular non-transponder steel key the battery in these keys will eventually need replacing. This is especially in the event that your car displays a message that the smart or remote key has low battery power.
It's a fairly simple process. To replace the keyfob battery remove your mechanical key from the slit at the back of the fob. Then, pull the cover open. Inside the key fob there will be tiny screws that hold the battery in its place. Take out the old battery by unwinding the screw with the help of a small screwdriver. Install the new battery and then close the slit on the key fob.
Test the key fob by pressing the lock and unlock buttons. If the doors lock and unlock as expected, then you're all set! You can now make use of your Kia's hands-free lock/unlock feature whenever your fingers feel cold or you need to go on errands around Brandon.
Note: Certain key fobs (transponder chip or smart keys) may require their programming completed. This requires a programing machine which is available to the locksmith who works for the automotive dealer. Other keys (non transponder keys made of metal), do not need programming. If you're looking to reprogramme your key, you'll have to note the key code's number on the tag for the key code.
How do you replace the battery?
If your Kia key fob is not responding to pressing the lock or unlock button on the fob, it is a clear indication that the battery should be replaced. A low battery can also cause other issues, like the check engine light flashing or the engine not working correctly. Fortunately, replacing the battery on the key fob is a relatively simple DIY task that requires only a few basic tools.
Make sure you turn off your vehicle and close the doors before you begin. Locate the small plastic piece at the bottom of your key fob and gently jiggle it until the metal key slips out. You can then insert the key in the driver's door handle to open your car.
To replace the battery in the key fob remove the rear cover. Use a plastic pry tool to loosen the latch that holds the black negative cable. Remove the old battery and then orient the replacement battery in a way that its "+" side is facing you, and the "-" negative side is facing the fob's electrical contacts. Avoid using excessive force when pushing the new CR2032 into place to avoid breaking or bending the steel contacts.
After installing the new battery and turning the key fob off and on in the ignition until the door locks up. You can then test your Kia's keys fob to ensure it is working correctly.
How can you replace the smart key
You could have a standard keyfob, or a Smart Key based on the model of Kia Sportage. The smart key has an embedded mechanical key blade, unlike the standard key fob, which does not. Both kinds of key fobs come with batteries inside which eventually needs to be replaced. It's quite simple and will take about two minutes.
Before you begin it is essential to ensure that you are on a level surface with adequate lighting and that your Kia is off. Be aware that the fob contains tiny parts that could be thrown off in the event of a mishap.
The small release button is located on the lower backside. It will be a circular button or rectangular slot. After pressing this button, the mechanical key blade will pop out and you can then open the key fob.
After the key fob has been opened, take out the battery that was in it. The new battery should be a CR-2032, and can be purchased online or at a local auto parts store. When you are done with the battery, you should be able to lock and unlock your car with your key fob, even if your engine isn't running!
How to replace the mechanical key
The Kia key fob is a fantastic feature that lets us lock and unlock our car at the push of the button. As with all devices it is possible that the Kia key fob can have issues at times. There are solutions to solve these issues and keep your key fobs working for many years.
One of the most common problems is a dead or dead battery. This can cause your fob to stop working or operate intermittently. If this is the problem then replace the battery with a new one.
If this doesn't solve the issue, try using a flathead screwdriver standard to wedge the plastic casing of the fob open. Be careful not to scratch any internal components or scratch the plastic. Once open, carefully remove the old battery and replace it with a new one.
After the new battery has been put installed, close and unlock the doors with the mechanical key (every kia fob has an emergency mechanical key that can fit in the slot). Test the key fob and ensure that it's working properly. If the device not working, contact a dealer or locksmith to help solve the problem. To avoid lockouts in the future, ensure that you have an emergency key that will work on all door and trunk cylinders.